Effects of envelopes on cardiac implantable electronic device pocket healing: A head-to-head preclinical evaluation.

BACKGROUND: The healing response to cardiac implantable electronic device (CIED) implantation results in inflammation that can lead to fibrous pocket formation, which may disrupt pocket healing or complicate future interventions. OBJECTIVE: The purpose of this study was to assess CIED pocket healing with use of the second-generation TYRX absorbable antibacterial envelope (T2), the next-generation (NG) TYRX absorbable antibacterial envelope under development, and the CanGaroo® extracellular matrix envelope (ECM) compared to no envelope. METHODS: A total of 110 CIEDs were implanted in an ovine model, either with (T2, NG, or ECM) or without envelopes. Histopathologic and morphometric analyses were completed at several timepoints after implant (3 days, 7 days, 4 weeks, 12 weeks, 24 weeks). An independent pathologist completed a blinded histopathology assessment of the pockets. RESULTS: TYRX (T2/NG) pockets showed similar inflammatory and healing profiles to controls with more rapid provisional matrix formation compared to controls and ECM. ECM pockets exhibited increased acute (3 and 7 days) and chronic (24 weeks) inflammation. T2/NG had almost complete (T2) or complete (NG) absorption by week 12. ECM remained present at week 24 and was associated with significantly thicker capsules (ECM 0.80 ± 0.14 mm; NG 0.37 ± 0.10 mm; control 0.56 ± 0.17 mm). CONCLUSION: Compared to ECM, pockets with TYRX showed less inflammation, more rapid provisional matrix formation, faster absorption, and thinner capsules. TYRX pockets had low inflammation comparable to controls with accelerated provisional matrix deposition and tissue adhesion. The healing response to CIEDs used with TYRX fosters the formation of a well-healed pocket, which may bring patient benefit beyond its proven infection reduction.

A Sensorless Modular Multiobjective Control Algorithm for Left Ventricular Assist Devices: A Clinical Pilot Study.

Background: Contemporary Left Ventricular Assist Devices (LVADs) mainly operate at a constant speed, only insufficiently adapting to changes in patient demand. Automatic physiological speed control promises tighter integration of the LVAD into patient physiology, increasing the level of support during activity and decreasing support when it is excessive. Methods: A sensorless modular control algorithm was developed for a centrifugal LVAD (HVAD, Medtronic plc, MN, USA). It consists of a heart rate-, a pulsatility-, a suction reaction-and a supervisor module. These modules were embedded into a safe testing environment and investigated in a single-center, blinded, crossover, clinical pilot trial (clinicaltrials.gov, NCT04786236). Patients completed a protocol consisting of orthostatic changes, Valsalva maneuver and submaximal bicycle ergometry in constant speed and physiological control mode in randomized sequence. Endpoints for the study were reduction of suction burden, adequate pump speed and flowrate adaptations of the control algorithm for each protocol item and no necessity for intervention via the hardware safety systems. Results: A total of six patients (median age 53.5, 100% male) completed 13 tests in the intermediate care unit or in an outpatient setting, without necessity for intervention during control mode operation. Physiological control reduced speed and flowrate during patient rest, in sitting by a median of -75 [Interquartile Range (IQR): -137, 65] rpm and in supine position by -130 [-150, 30] rpm, thereby reducing suction burden in scenarios prone to overpumping in most tests [0 [-10, 2] Suction events/minute] in orthostatic upwards transitions and by -2 [-6, 0] Suction events/min in Valsalva maneuver. During submaximal ergometry speed was increased by 86 [31, 193] rpm compared to constant speed for a median flow increase of 0.2 [0.1, 0.8] L/min. In 3 tests speed could not be increased above constant set speed due to recurring suction and in 3 tests speed could be increased by up to 500 rpm with a pump flowrate increase of up to 0.9 L/min. Conclusion: In this pilot study, safety, short-term efficacy, and physiological responsiveness of a sensorless automated speed control system for a centrifugal LVAD was established. Long term studies are needed to show improved clinical outcomes. Clinical Trial Registration: ClinicalTrials.gov, identifier: NCT04786236.

Brief anesthesia, but not voluntary locomotion, significantly alters cortical temperature.

Changes in brain temperature can alter electrical properties of neurons and cause changes in behavior. However, it is not well understood how behaviors, like locomotion, or experimental manipulations, like anesthesia, alter brain temperature. We implanted thermocouples in sensorimotor cortex of mice to understand how cortical temperature was affected by locomotion, as well as by brief and prolonged anesthesia. Voluntary locomotion induced small (∼ 0.1 °C) but reliable increases in cortical temperature that could be described using a linear convolution model. In contrast, brief (90-s) exposure to isoflurane anesthesia depressed cortical temperature by ∼ 2 °C, which lasted for up to 30 min after the cessation of anesthesia. Cortical temperature decreases were not accompanied by a concomitant decrease in the γ-band local field potential power, multiunit firing rate, or locomotion behavior, which all returned to baseline within a few minutes after the cessation of anesthesia. In anesthetized animals where core body temperature was kept constant, cortical temperature was still > 1 °C lower than in the awake animal. Thermocouples implanted in the subcortex showed similar temperature changes under anesthesia, suggesting these responses occur throughout the brain. Two-photon microscopy of individual blood vessel dynamics following brief isoflurane exposure revealed a large increase in vessel diameter that ceased before the brain temperature significantly decreased, indicating cerebral heat loss was not due to increased cerebral blood vessel dilation. These data should be considered in experimental designs recording in anesthetized preparations, computational models relating temperature and neural activity, and awake-behaving methods that require brief anesthesia before experimental procedures.